Home

Tips For Installing A Temporary Fencing Correctly

Whether you are an event planner or run a construction project, keeping your space safe is paramount. Be it keeping the crowds out or ensuring the safety of your employees, you need to physically distance people from restricted work areas. 

Installing a temporary fencing panel is one of the best ways to keep your site safe. They are specially designed for short-term projects and can be quickly assembled and put away easily. 

However, it is critical to install these panels correctly and safely, especially in a high wind area. It doesn’t take much in them turning into dangerous obstacles if not installed correctly. 

Here are some expert tips on how to get the most out of your temporary fencing and install them in the right way:

Space Assessment

One of the most critical steps in a temporary fence panel installation is to assess the space where it will be fixed. Just like any other fence, a temporary fence also requires solid and level ground. Slippery or slushy areas or the ones that have elevation changes or drops may not work too well. 

High wind or rains may pull your fence down. You need to give time to survey your grounds and find the best area to install the fence in. 

Draw Your Boundaries

Once you know the appropriate area to put the fence in, the next step is to draw out the boundary. You can do this with either spray paint lines or setting up cones. You could also use a warning tape. Defining the boundary helps in letting you visualizing the fence. These things also act as a temporary barrier while you are installing the boundary and help in keeping trespassers away.

Ensure You Have All The Equipment

Before you begin the fence panel installation, you should assess if you have the required supplies and equipment necessary for the job. You will need tools and materials like brackets, safety struts, concrete blocks, shifting spanner, etc. to install a good and sturdy fence. 

Lay Out The Fence’s Base

Once you know the area where the fence will go and have gathered the necessary equipment, you need to start laying out the base of the fencing. You will start with plastic feet or the base blocks. They are sturdy enough to hold the fence panels in their place. 

Lay the first base block and then place the fence panel in it. The other block goes on the other side. This way you need to cover the entire fence perimeter. 

Install the Safety Stays

Once your fence is in place over the desired parameter, you need to ensure that the fence stays upright. For this, you will need safety stays. They are an essential tool to keep your fence stable and secure, especially during days of inclement weather. 

They are put in after the whole fence has been assembled. They go at the back of the fence panels using brackets. These brackets are used near the end and middle of the fence panels. To make the fence even stronger, you can use a heavy object like a sandbag to press down on them. 

Keep a Tab on The Fence

Once you have completed the fence panel installation, it is critical to maintaining it. Temporary fencing has the tendency to change over time, often due to changes in the weather. Storms and rains often move or knock down fences. To prevent the fence from toppling over or harming anyone, you need to conduct regular checks. 

Periodically check the stays and the sandbags. If you find anything that needs fixing, do that immediately. If you find the fence to be rusting, call your contractor and get it refurbished or replaced immediately. 

If this is the first time that you are installing a temporary fence or are not confident about installing it yourself, seek out a reliable contractor like Battlefield Supply. We have secured hundreds of project sites of all scales and sizes all over Alberta through our innovative fencing solutions. We offer 24-hour delivery, free quotes, and round-the-clock service. To know more about us, call us at 403-700-5922. You can visit our office at 255185 Rg Rd 280 Delacour, Ab.  

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button